Fire Sci. Eng. Search

CLOSE


Fire Sci. Eng. > Volume 27(4); 2013 > Article
Fire Science and Engineering 2013;27(4):41-46.
DOI: https://doi.org/10.7731/KIFSE.2013.27.4.41    Published online August 31, 2013.
가구소재의 화재전파해석을 위한 열해리 물성 평가
김성찬
경일대학교 소방방재학과
Estimation of Pyrolysis Properties for Fire Propagation Analysis of Furniture Materials
Kim Sung-Chan
Dept. of Fire Safety, Kyungil Univ.
요약
본 연구는 가구류를 구성하는 주요 재료의 열적조건에 따른 반응특성과 화염전파해석에 필요한 열해리 물성을 제공하기 위해 열중량분석을 수행하였다. 실험대상 시편은 가구류에 널리 적용되는 MDF 판재와 코팅재, 합성피혁과 쿠션재 등이며 가열율 $10^{circ}C/min$, 최대 온도 $600^{circ}C$까지 실험을 수행하였다. 실험결과 MDF 소재의 경우 $324^{circ}C$에서 피크 반응을 나타냈었으며 MDF 코팅재의 경우 초기 피크반응온도가 $270{sim}280^{circ}C$로 감소하였다. 합성피혁과 폼 소재의 경우 재료를 구성하는 폴리머의 종류에 따라 기준온도와 기준 반응율이 차이를 보였으나 기준온도는 $270^{circ}C$$420^{circ}C$ 정도로 비교적 유사한 경향을 나타냈다. Lyon 등이 제시한 방법에 의해 반응상수와 활성화 에너지를 산정하기 위해 시편의 기준 온도와 기준 반응율을 제시하였으며 이러한 기초 물성연구를 통해 화염전파특성을 이해함과 동시에 화재해석의 신뢰성을 향상시키는데 기여하고자 한다.
Abstract
The present study has been conducted to investigate the reaction kinetics and pyrolysis parameters for flame propagation analysis of furniture material components. TGA measurement for component materials such as MDF (medium density fiberboad) panel including coating material, synthetic leather and foam cushion are performed under maximum temperature of $600^{circ}C$ and heating rate of $10^{circ}C/min$. The results of TGA have shown that the peak temperature of MDF panel was $324^{circ}C$ and the initial peak temperature of coating material decreased by $270{sim}280^{circ}C$. In the case of synthetic leather and foam materials, the reference temperature and reference rate depend on the type of polymer consisting the sample, the initial kinetic characteristics was classified into 2 categories of about $270^{circ}C$ and $420^{circ}C$ of reference temperature for the tested synthetic materials. The present study showed the pyrolysis parameters of reference temperature and reference rate proposed by Lyon to evaluate the pre-exponential factor and activation energy. The present study can contribute to improve the reliability of computational fire analysis and enhance the understanding of fire propagation phenomena based on the thermal properties study of material.
Key Words: Thermo-gravimetric analysis, Pyrolysis, Thermal decomposition, Fire propagation


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next