2. S. R Lee and K. H Youk, “A Study on Fire Behavior of Combustibles in a Residential Building”, Fire Science and Engineering, Vol. 23, No. 4, pp. 25-31 (2009).
3. D. G Nam, “Heat Release Characteristics of Typical Live Fire Load in Large Bookstore”, Fire Science and Engineering, Vol. 25, No. 2, pp. 88-94 (2011).
4. H. J Kim, I. K Kwon, O. S Kweon, H. Y Kim and S. U Chae, “The Real Fire Test in Bedroom for the Performance Based Fire Design”, Fire Science and Engineering, Vol. 27, No. 6, pp. 32-37 (2013),
https://doi.org/10.7731/KIFSE.2013.27.6.032.
5. J. H Cho, C. H Hwang, J. S Kim and S. K Lee, “Sensitivity Analysis of FDS Results for the Input Uncertainty of Fire Heat Release Rate”, Journal of the Korean Society of Safety, Vol. 31, No. 1, pp. 25-32 (2016),
https://doi.org/10.14346/JKOSOS.2016.31.1.025.
6. NRC and EPRI, “Verification and Validation of Selected Fire Models for Nuclear Power Plant Applications”, NUREG-1824 and EPRI 3002002182, Final Report, (2015).
7. H. S Yun, D. G Nam and C. H Hwang, “A Numerical Study on the Effect of Volume Change in a Closed Compartment on Maximum Heat Release Rate”, Fire Science and Engineering, Vol. 31, No. 5, pp. 19-27 (2017),
https://doi.org/10.7731/KIFSE.2017.31.5.019.
9. W. K Chow, “Concerns on Estimating Heat Release Rate of Design Fires in Fire Engineering Approach”, International Journal on Engineering Performance-Based Fire Codes, Vol. 11, No. 1, pp. 11-19 (2012).
10. B Beak, C. B Oh, E. J Lee and D. G Nam, “Application Study of Design Fire Curves for Liquid Pool Fires in a Compartment”, Fire Science and Engineering, Vol. 31, No. 4, pp. 43-51 (2017),
https://doi.org/10.7731/KIFSE.2017.31.4.043.
11. B Beak, C. B Oh and C. Y Lee, “Evaluation of Modified Design Fire Curves for Liquid Pool Fires Using the FDS and CFAST”, Fire Science and Engineering, Vol. 32, No. 2, pp. 7-16 (2018),
https://doi.org/10.7731/KIFSE.2018.32.2.007.
12. S. Y Choi, J. Y Kim, D. G Nam and S. C Kim, “Comparative Study on the Estimation Method of Fire Load for Residential Combustibles”, Fire Science and Engineering, Vol. 27, No. 6, pp. 38-43 (2013),
https://doi.org/10.7731/KIFSE.2013.27.6.038.
13. A. E Cote, “Fire Protection Handbook”, National Fire Protection Association, 20th Edition., Vol. 1, Sec. 18, Chapter. 4 (2008).
14. D. G Nam and C. H Hwang, “Measurements of the Heat Release Rate and Fire Growth Rate of Combustibles for the Performance-Based Design - Focusing on the Combustibles in Residential and Office Spaces”, Fire Science and Engineering, Vol. 31, No. 2, pp. 29-36 (2017),
https://doi.org/10.7731/KIFSE.2017.31.2.029.
15. H. Y Jang and D. G Nam, “Measurements of the Heat Release Rate and Fire Growth Rate of Combustibles for the Performance-Based Design-Focusing on the Plastic Fire of Commercial Building”, Fire Science and Engineering, Vol. 32, No. 6, pp. 55-62 (2018),
https://doi.org/10.7731/KIFSE.2018.32.6.055.
16. D. G Nam, H. Y Jang, C. H Hwang and O. K Lim, “A Study on the Heat Release Characteristics of Fire Load for Performance Based Design of Multiplexes:A Focus on the Heat Release Rate and Fire Spread Rate of Cinema Seats”, Fire Science and Engineering, Vol. 34, No. 1, pp. 11-17 (2020),
https://doi.org/10.7731/KIFSE.2020.34.1.011.
18. N Akiko, K Norichika, K Jun, T Tsuneto, A Toshihiko, N Tsutomu, O Yoshihumi and H Kazunori, “Development of a Simple Estimation Method of Heat Release Rate based on Classification of Common Combustibles into Category Groups”, Fire Science and Technology, Vol. 25, No. 1, pp. 31-54 (2006),
https://doi.org/10.3210/fst.25.31.
20. H Ingason, “An Experimental Study of Rack Storage Fires”, SP Fire Technology, SP Report 2001:19, (2001).