Fire Sci. Eng. Search

CLOSE


Fire Sci. Eng. > Volume 30(1); 2016 > Article
Fire Science and Engineering 2016;30(1):31-36.
DOI: https://doi.org/10.7731/KIFSE.2016.30.1.031    Published online February 28, 2016.
실험과 계산을 통한 에폭시 계열 내화도료의 열분해에 관한 연구
김양균
한국건설기술연구원 화재안전연구소
Experimental and Numerical Study of the Thermal Decomposition of an Epoxy-based Intumescent Coating
Kim Yangkyun
Fire Research Institute, Korea Institute of Civil Engineering and Building Technology
요약
본 연구는 에폭시 계열 내화 도료의 열분해 특성을 파악하기 위해 열중량분석과 수치해석을 동시에 수행하였다. 에폭시 계열 내화 도료의 질량 감소 양상을 수치적으로 구현하기 위한 계산 모델이 소개되었으며, 계산 모델은 내화 도료의 여러 열분해과정을 단순화하여 4 단계의 순차적인 열분해 형태로 만들었다. 반응 속도는 Arrhenious 형태로 모델 되었고, 열중량분석을 통해 획득된 열분해 현상을 수치적으로 모사하기 위하여 화학 반응 매개변수들이 최적화되었다. 실험 결과 두 단계(two-step)와 세 단계(three-step)의 급격한 질량 감소가 질소와 공기 분위기에서 각각 나타났다. 또한 도료가 공기 분위기에 노출되었을 때 산소의 참여로 발생하는 복합적인 화학 반응들이 내화도료의 안정화를 도와 $200{sim}500^{circ}C$ 범위에서 질량 감소율을 낮추었다. 수치해석 결과는 실험과 비교하여 전체적으로 잘 일치하였으며 수치 모델에 포함되지 않은 $800^{circ}C$ 이후를 제외하면 3% 미만의 오차를 보였다.
Abstract
This study investigates the characteristics of thermal decomposition of an epoxy-based intumescent paint using thermogravimetric analysis (TGA) and numerical simulation. A mathematical and numerical model is introduced to describe mass loss profiles of the epoxy-based intumescent coating induced by the thermal decomposition process. The decomposition scheme covers a range of complexity by employing simplified 4-step sequential reactions to describe the simultaneous thermal decomposition processes. The reaction rates are expressed by the Arrhenius law, and reaction parameters are optimized to fit the degradation behavior seen during thermogravimetric (TG) experiments. The experimental results show a major 2-step degradation under nitrogen and a 3-step degradation in an air environment. The experiment also shows that oxygen takes part in the stabilization of the intumescent coating between 200 and $500^{circ}C$. The simulation results show that the proposed model effectively predicts the experimental mass loss as a function of time except for temperatures above $800^{circ}C$, which were intentionally not included in the model. The maximum error in the simulation was less than 3%.
Key Words: Thermal decomposition, Thermo-gravimetric analysis, Numerical simulation, Fire safety


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next