J. Kor. Inst. Fire Sci. Eng. Search

CLOSE


Journal of Korean Institute of Fire Science and Engineering 2007;21(3):78-83.
Published online September 30, 2007.
디젤연료의 액면화재로부터 화염온도와 복사열 측정
임우섭, 최재욱
1부경대학교 안전공학부2부경대학교 안전공학부
Measurements of Flame Temperature and Radiation Heat Flux from Pool Fire with Petroleum Diesel Fuel
Lim Woo-Sub, Choi Jae-Wook
요약
석유류 중에서도 차량, 선박, 보일러 등에 많이 사용되고 있는 디젤유는 휘발유나 등유보다도 연소시에 발열량이 높기 때문에, 화재 발생시에 큰 피해를 초래한다. 따라서 본 연구는 시중에 판매중인 디젤유을 이용하여 액면화재 실험을 하였으며, 연소시에 화염의 내부온도와 화염으로부터 발생되는 복사열에 대해서 측정하였다. 디젤유의 순간 최대화염온도는 $900^{circ}C$ 이상되는 것으로 나타났으며, 평균 최대화염온도는 $800^{circ}C$ 이상으로 나타났다. 또한 최대화염온도는 가연성 액체의 표면으로부터 5 H/D에서 나타났으며, 이 거리 보다 멀어질 수로 화염의 온도는 낮아졌다. 복사열의 경우 저장용기의 크기와 시료의 량에 따라서 크게 달라지는 것을 알 수 있었으며, 실험 용기의 크기가 0.5 m이고, 시료량이 13 mm와 20 mm에서는 각각 92.29 kW와 117.43 kW로 나타났으며, 크기가 1.0 m의 용기에서는 각각 364.35 kW와 405.88 kW로 나타났다.
Abstract
Diesel, a kind of petroleum, which is used in vehicles, vessels, boilers etc causes great damage when a fire happens, because it has higher caloric value than gasoline or kerosene has at burning. Therefore, pool fire experiment was carried using diesel which is sold on the gas station and radiation heat flux that occurs from flame and inner temperature of flame at burning was estimated. The maximum instantaneous flame temperature of diesel was more than $900^{circ}C$, and the average of maximum flame temperature was $800^{circ}C$ which occurred at 0.5 H/D distance from the surface of inflammable liquid, the distance has more long that has the lower the temperature of flame. In case of radiation heat flux, it grew to vary according to the size and amount of sample. When the size of a container for experiment was 0.5 m and sample layer was 13 mm and 20 mm, the radiant heat was 92.29 kW and 117.43 kW each. When the container was 1.0 m, it was 364.35 kW and 405.88 kW each.
Key Words: Petroleum diesel, Pool fire, Flame temperature, Radiation heat flux
TOOLS
Share :
Facebook Twitter Linked In Google+ Line it
METRICS Graph View
  • 409 View
  • 9 Download
Related articles in Fire Sci. Eng.

Measurement of the Device Properties of Fixed Temperature Heat Detectors for the Fire Modeling2014 February;28(1)



ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next