J. Kor. Inst. Fire Sci. Eng. Search

CLOSE


Journal of Korean Institute of Fire Science and Engineering 2008;22(5):22-28.
Published online December 31, 2008.
백열전구의 소손 패턴 분석을 통한 화재조사 연구
김향곤, 김동우, 문현욱, 최충석, 최효상
1한국전기안전공사 전기안전연구원2한국전기안전공사 전기안전연구원3한국전기안전공사 전기안전연구원4전주대학교 공과대학 소방안전공학과5조선대학교 공과대학 전기공학과
Study on the Fire Investigation by Damaged Pattern Analysis of Incandescent Lamps
Kim Hyang-Kon, Kim Dong-Woo, Moon Hyun-Wook, Choi Chung-Seog, Choi Hyo-Sang
요약
본 논문에서는 백열전구의 외부 열 또는 외부 충격과 같은 외적 스트레스에 의한 소손 패턴에 대하여 실험, 분석하였다. 점등 중 외부 열에 의해 유리구가 용융되면서 필라멘트가 산화되고 결국 단선되어 필라멘트에는 용융흔이 식별되었다. 또한, 백열전구의 설치 방향에 따라 증발된 필라멘트 입자의 흡착 패턴에 차이가 있었으며 증발된 필라멘트 입자는 도입선, 앵커, 유리구 내에 흡착되었다. 점등 중 외부 충격에 의해 소손된 경우, 필라멘트는 단선되고 용융되었으나 증발은 되지 않았다. 이상의 연구결과는 화재현장에서 백열전구의 통전유무를 입증하는데 도움이 될 것으로 기대된다.
Abstract
In this paper, we conducted experiments on damaged patterns of incandescent lamps by external stress, such as external flame or external impact. Glass bulbs were melted and filaments were evaporated by external flame when the bulbs were lit, and finally molten marks were recognized at the filaments. Also, there were some differences in absorption patterns of evaporated filament elements according to set-up directions, and evaporated filament elements were absorbed in lead-in wires, support, inside of glass. In case the bulbs were lit and they were damaged by external impacts, filament burned out. Filaments were not evaporated but melted. We expect that this results could be used to judge whether electric current flew through incandescent lamps or not in fire site.
Key Words: Incandescent lamp, Flame and impact, Fire investigation, Damaged patterns, SEM


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next