J. Kor. Inst. Fire Sci. Eng. Search

CLOSE


Journal of Korean Institute of Fire Science and Engineering 2010;24(5):102-106.
Published online October 31, 2010.
권총용 화약잔사의 실측 및 발화특성에 관한 연구
송재용, 최영우, 김동환, 남정우, 김진표
1국립과학수사연구소2국립과학수사연구소3국립과학수사연구소4국립과학수사연구소5국립과학수사연구소
A Study on Measuring Residues and Ignition Characteristics of the Gunpowder by Using a Handgun
Song Jae-Yong, Choi Young-Woo, Kim Dong-Hwan, Nam Jung-Woo, Kim Jin-Pyo
요약
본 논문은 실내사격장 화재 원인에 대한 조사를 위하여 권총 사용에 따른 화약잔사 양에 대한 실측 및 발화특성에 관하여 연구하였다. 화약잔사 양은 구경 0.38인치 권총 및 구경 9mm 권총을 사용하였으며, 사대 및 바닥면에 떨어지는 화약잔사를 측정하였다. 화약잔사에 대한 발화특성 평가를 위하여 충격감도, 정전기감도, 마찰감도 및 발화점 시험을 실시하였으며, 비교 평가에는 권총에 일반적으로 사용되는 사용전의 화약(ball powder)을 이용하여 화약잔사와 동일한 시험을 실시하였다. 실험결과 충격감도 및 마찰감도는 화약잔사에서 다소 높게 측정되었으며, 발화점 시험에서는 화약잔사가 비교대상인 사용전의 화약에 비해 낮은 온도에서 발화되는 특성을 나타내었다.
Abstract
This paper studied the measurement about the gunpowder residue quantity by using a handgun and we carried out an experiment ignition characteristics of the gunpowder residue for the investigation fire cause into the indoor shooting range in Busan. The measurement of the gunpowder residue quantity is spouted by using a 0.38 inch gun and 9 mm gun. We were carried out evaluation experiments such as impact sensitivity test, static electricity sensitivity test, friction sensitivity test and measuring a flash point for the ignition characteristics about the gunpowder residue. From experiment results, the impact sensitivity and friction sensitivity of the gunpowder residue in comparison with ball powder are highly sensitive and the gunpowder residue ignites at a relatively low temperature.
Key Words: Shooting range, Handgun, Gunpowder, Ball powder, Ignition characteristics


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next