J. Kor. Inst. Fire Sci. Eng. Search

CLOSE


Journal of Korean Institute of Fire Science and Engineering 2011;25(1):63-71.
Published online February 28, 2011.
내화 피복된 비대칭 H형강을 적용한 슬림플로어 보의 재하가열조건 화재거동에 관한 실험적 연구
김형준, 김흥열, 민병렬, 이재승, 박수영
1한국건설기술연구원2한국건설기술연구원3한국건설기술연구원4한남대학교5방재시험연구원
An Experimental Study on Structural Behaviour of Asymmetric H Beam Slim floor under Load Condition in Fire
Kim Hyung-Jun, Kim Hyung-Jun, Min Byung-Youl, Lee Jae-Sung, Park Soo-Yong
요약
비대칭 H형강을 활용한 슬림플로어의 경우, 상대적으로 열전달 속도가 낮은 콘크리트에 강재가 매립된 형상으로 설계되어 화재조건에서 강재의 강성저하를 최소화 할 수 있는 형상으로 설계되었다. 그러나 비대칭 H형강의 하부플렌지는 화재에 직접적으로 노출되므로, 이 부분에 대한 내화피복을 적용하여 슬림플로어 보의 내화성능을 최대한 확보할 수 있는 방안을 모색하고자 하였다. 실험계획은 재하 하중비 0.4와 0.3을 조정하여 하중조건에 따른 내화성능을 비교하고자 하였고 철근보강에 따른 내화성능 향상효율, 내화피복을 적용하였을 경우의 180분 내화성능 확보 유 무를 분석하고자 실험을 수행하였다. 하중비 변화에 따른 실험체를 비교한 결과, 0.1 의 하중비를 낮출 경우 내화성능은 12분 차이가 나며, 처짐격차는 39mm였다. 철근보강에 따른 영향은 12분정도의 내화성능 향상이 가능하며, 최대 102.4mm의 처짐이 제어된다.
Abstract
When it comes to slim floor using asymmetric H-beam, it was designed that the steel member is embedded in concrete with relatively low thermal conductivity so as to minimize the deterioration of rigidity of steel member in fire. But given the bottom flange of asymmetric H-beam is directly exposed to the fire, the measure of applying the fireproof coating to improve the fire rate performance of slim floor beam was sought. The test was aimed at comparing the fireproof performance by adjusting the load ratio of 0.4 and 0.3, and The test was carried out to identify the 3-hour fire performance by reinforcing the beam as well as applying the fireproof coat, In the wake of comparing the specimen depending on variation of load ratio, lowering load ratio by 0.1 resulted in difference of 12 minutes and deflection was 39 mm. It was able to improve 12 minutes by reinforcing the beam and up to 102.4 mm in deflection.
Key Words: Asymmetric H-Beam, Slimfloor, Standard fire, Load ratio, Fireproof


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next