J. Kor. Inst. Fire Sci. Eng. Search

CLOSE


Journal of Korean Institute of Fire Science and Engineering 1996;10(4):29-36.
Published online December 31, 1996.
건물의 화재 위험성 평가를 위한 모델(Model) 개발
이수경김수태
1서울산업대학교 안전공학과2삼성전자(주) 환경안전팀
A Development of Model for Fire Hazard Assessment in the Buildings
요약
건축물 화재로 인한 인적, 물적 피해를 방지하기 위하여는 먼저 이들 시설, 설비에 존재하는 잠재위험요인을 찾아내고 위험이 얼마나 큰가를 분석하는 위험성 평가가 수행되어야 한다. 본 연구에서는 건물의 화재 위험성을 822개의 Checklist에 의해 평가하도록 하였으며, 정량적 평가를 위하여 주요 구성 요소를 10개의 대분류로 나누고, 가중치를 부여하여 100점 만점의 점수를 산출하도록 하였다. 건물의 실제평가를 통하여 평가 모델의 적정성을 검토한 결과, 본 모델은 일반 모든 건물에 대하여 평가 적용이 가능하도록 되었다. 또한 Checklist에 의한 세부적인 질문기법으로 작성되어 건물의 화재 위험성 평가를 수월하게 수행할 수 있도록 하였다. 따라서 본 평가모델의 제시는 이제까지 국내에서 소방진단을 위한 뚜렷한 평가모델이 마련되지 못한 현시점에서 방화관리자 등 소방관련자에게 매우 유익한 평가모델이 될 것이다.
Abstract
The hazard assessment in which the potential hazard factors in the buildings are investigated and the scale of the hazard is analyzed should be performed first in order to prevent personal and material damages due to building fire. In this study, the building fire hazard are assessed using 822-item checklist, for the qualitative evaluation of which the main factors are classified into 10 items, yielding 100 scale points with some weighting. It is shown that present model is applicable for the assessment of all general buildings through the examination of the suitability of assessment model by actual assessment of existing building. Also, the checklist is prepared in itemized questionnaire form for easy assessment of building fire hazard. Therefore, the present model will be helpful for those working in fire prevention, who are suffering from the lack of manifest evaluation model for the fire prevention assessment so far in Korea.


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next